BAL Wide Joint Grout

A water-resistant, frost-resistant cement-based powder grout designed for grouting ceramic floor tiles, mosaics, quarries etc. Also suitable for use on walls. Not recommended for soft glazed wall tiles, or tiles with metal decor or lustre. Suitable for use in interior and exterior locations in both wet and dry conditions. Suitable for swimming pools.

Conforms to BS EN 13888, Type C, Class G1.

NOTE: The physical properties of BAL WIDE JOINT GROUT can be enhanced by the addition of BAL ADMIX GT1. The polymer admixture imparts flexibility, increases adhesion and reduces the water permeability thus widening the application possibilities of the grout, with a classification of BS EN 13888, Type C, Class G2.

Coverage :
150 x 150 x 9mm tile, 3mm joint = 0.6kg/m2
200 x 100 x 9mm tile, 6mm joint = 1.25kg/m2
Powder/ Water Ratio :5 : 1
Joint Width :3-12mm
Specific Gravity :1.67 g/cm3
Pot Life :@ 20°C 45 mins
Cure :@ 20°C 24 hours
Packaging :10kg & 3.5kg bags
Shelf Life :12 months when stored in normal, dry conditions. Protect from damp.
Temperature Resistance-30°C to 150°C
Colour:White, Ivory, Grey, Charcoal, *Limestone & *Sandstone (*10kg only)

BAL Wide Joint Grout

BAL grout information and guidance.

BAL Wide Joint Grout

BAL Adhesives

BAL Grouts

BAL Levelling Compounds